FIRMMWARE
http://adf.ly/1m4TLf
TOOL
http://adf.ly/1m4UBz
FLAS GUIDE
Guide: how to flash
Fastboot Flashing - SP Flash Tool:
Go to to SP_Flash_Tool_exe_Windows_v5.1620.00 folder and right-click "flash_tool.exe", then choose "Run as adminsitrator" as shown below:
Once in the SP Flash Tool, click on the "Download Agent" and locate "MTK_AllInOne.bin" from the unzipped SP Flash Tool folder earlier and click Open, as shown below:
Next click on the "Scatter loading" button and locate the "MT6797_Android_scatter" from the unzipped "nikel_global_images_V8.0.3.0.MBFMIDG_20160805 .000 0.29_6.0_global" folder earlier and click Open, as shown below:
Uncheck EVERYTHING, then Check BOOT and SYSTEM.
Now turn your Redmi Note 4 Off.
Connect the USB to the PC/ Laptop, and the other end (USB C) dont connect to phone first.
Now click the "Download" button.
PRESS and HOLD Volume Down, keep holding it and immediately plug in your USB C to the phone.
You will immediately see the progress bar going Red, Purple momentarily, and Yellow for a few minutes until the flashing process is complete, as shown below:
Release Volume Down button.
**NOTE: If Volume Down alone did not work, use Volume Down + Power Button instead**
http://adf.ly/1m4TLf
TOOL
http://adf.ly/1m4UBz
FLAS GUIDE
Guide: how to flash
Fastboot Flashing - SP Flash Tool:
Go to to SP_Flash_Tool_exe_Windows_v5.1620.00 folder and right-click "flash_tool.exe", then choose "Run as adminsitrator" as shown below:
Once in the SP Flash Tool, click on the "Download Agent" and locate "MTK_AllInOne.bin" from the unzipped SP Flash Tool folder earlier and click Open, as shown below:
Next click on the "Scatter loading" button and locate the "MT6797_Android_scatter" from the unzipped "nikel_global_images_V8.0.3.0.MBFMIDG_20160805 .000 0.29_6.0_global" folder earlier and click Open, as shown below:
Uncheck EVERYTHING, then Check BOOT and SYSTEM.
Now turn your Redmi Note 4 Off.
Connect the USB to the PC/ Laptop, and the other end (USB C) dont connect to phone first.
Now click the "Download" button.
PRESS and HOLD Volume Down, keep holding it and immediately plug in your USB C to the phone.
You will immediately see the progress bar going Red, Purple momentarily, and Yellow for a few minutes until the flashing process is complete, as shown below:
Release Volume Down button.
**NOTE: If Volume Down alone did not work, use Volume Down + Power Button instead**
No comments:
Post a Comment